E-mail: dhsales@sdhcast.com
Keywords: DIN Standard Malleable Iron Pipe Fittings, Banded Malleable Iron Pipe Fittings
Home > Products > Tube Clamps
Tube Clamps
160 Malleable Iron Clamp on Cross over
Our Malleable Iron Clamp on Cross over is manufactured according to the requirements of EN-GJMB-300-6 with tensile strength min 300 N/mm2 and elongation min 6%.
161 90° Malleable Iron Cross Over
Usually the real tensile strength is higher than 300, it may reach to 330 and the elongation may reach to 8%.
165 Malleable Iron Combination Socket
Our Malleable Iron Combination Socket is manufactured according to the requirements of EN-GJMB-300-6 with tensile strength min 300 N/mm2 and elongation min 6%.
167 Malleable Iron Double Swivel Comb
Our Malleable Iron Double Swivel Comb is manufactured according to the requirements of EN-GJMB-300-6 with tensile strength min 300 N/mm2 and elongation min 6%.
169m Malleable Iron Male Swivel Locating Flange
Our Malleable Iron Male Swivel Locating Flange is manufactured according to the requirements of EN-GJMB-300-6 with tensile strength min 300 N/mm2 and elongation min 6%. Usually the real tensile strength is higher than 300, it may reach to 330 and the elongation may reach to 8%.
173 Malleable Iron Single Swivel
Our Malleable Iron Single Swivel is manufactured according to the requirements of EN-GJMB-300-6 with tensile strength min 300 N/mm2 and elongation min 6%. Usually the real tensile strength is higher than 300, it may reach to 330 and the elongation may reach to 8%.
173F Malleable Iron Female Swivel
Our Malleable Iron Female Swivel is manufactured according to the requirements of EN-GJMB-300-6 with tensile strength min 300 N/mm2 and elongation min 6%. Usually the real tensile strength is higher than 300, it may reach to 330 and the elongation may reach to 8%.
173M Malleable Iron Single Male Swivel
Our Malleable Iron Single Male Swivel is manufactured according to the requirements of EN-GJMB-300-6 with tensile strength min 300 N/mm2 and elongation min 6%.
174 Malleable iron pipe clamps fittings
Our Malleable iron pipe clamps fittings is manufactured according to the requirements of EN-GJMB-300-6 with tensile strength min 300 N/mm2 and elongation min 6%.
Products
Tags
